Free shipping for the catalog

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

The G4 was a very rare release, having been marketed as an update of the previously launched G1.
Designed at the request of the German army, this elegant 6-wheeled off-roader
was produced in only 57 units, many of which no longer exist.

The car used an elongated box-section frame that allowed for generous interior
room with comfortable seating for up to 7.
Seating was provided by two benches (front and rear) and one middle-placed row
of seats with separate arm rests.

The car was a beauty incorporating several technological advancements
such as suspension system comprising three rigid axles mated to semi-elliptical leaf-springs.
Only three entirely original G4 cars are know to exist today
with one belonging to the Spanish royal family.
The G4 was a very rare release, having been marketed as an update of the previously launched G1.
Designed at the request of the German army, this elegant 6-wheeled off-roader
was produced in only 57 units, many of which no longer exist.

The car used an elongated box-section frame that allowed for generous interior
room with comfortable seating for up to 7.
Seating was provided by two benches (front and rear) and one middle-placed row
of seats with separate arm rests.

The car was a beauty incorporating several technological advancements
such as suspension system comprising three rigid axles mated to semi-elliptical leaf-springs.
Only three entirely original G4 cars are know to exist today
with one belonging to the Spanish royal family.

Technical data: Mercedes-Benz G4, W 31 series, 1934 – 1939

General data:
Wheelbase: 3100 + 950 mm
Front/rear track width: 1620/1570/1570 mm
Dimensions (length x width x height): 5360-5720 x 1870 x 1900 mm (with soft-top)
Turning circle: 17 meters
Weight: approx. 3700 kg (in ready-to-drive condition)
Permissible gross weight: 4400 kg
Top speed permitted by the tires: 67 km/h
Fuel consumption: 28 liters/100 km (urban), 38 liters/100 km (offroad)
Fuel tank capacity: 90 liters, on some units 140 liters

Engine
Daimler-Benz M24 or M24 II eight-cylinder in-line engine
Total displacement: initially 5018 cc, later 5401 cc
Bore x stroke: 86 x 108 mm / 88 x 111 mm
Output: 100 hp / 110 hp at 3400/min
Torque: 28.8 mkg at 1400/min
Compression ratio: 1:5.6 / 1:5.2
Mixture formation: one double carburetor
Valves: overhead, lateral camshaft, driven by spur gears
Cooling: pump, 26 liters of water
Lubrication: force-feed, ten liters of oil
Battery: 12 V 60 Ah / 12 V 105 Ah
Alternator: 130 kW
Starter motor: 1.5 hp / 1.8 hp

Transmission
Four driven rear wheels, two self-locking differentials
Clutch: single-plate dry clutch
Transmission: four-speed manual and countershaft transmission
Ratios: I/4.10, II/2.21, III/1.49, IV/1.00
Drive ratios of countershaft transmission: road/1.00, offroad/3.06

Chassis
Box-section frame
Front wheel suspension: rigid axle, semi-elliptic springs
Rear wheel suspension: two rigid axles, one semi-elliptic spring for two wheels on each side
Steering: helical spindle
Brakes: dual-circuit system, hydraulic with vacuum assistance, acting on front and rear wheels; mechanical
hand-operated parking brake, acting on front wheels
Lubrication: central
Wheels: steel disc wheels with drop center rims, size L 4.00 F x 17;
with self-sealing tires: size 6.00 F x 17
Tires: 7.5-17 with offroad tread (normal or self-sealing)

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Check out our MAKING of:

The NAG BUESSING TRUCK 2ith 3t BILSTEIN CRANE online

Copy this link and paste it in a new browser window:

http://www.onesixth.co.uk/vb4forum/showthread.php?2163-1-6-R-C-NAG-BUESSING-2ton-crane-and-recovery-truck-custom-bu&p=17985#post17985