Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

BASIC R/C Simulated armor to scale Heavy duty industry standard hi torque drive motors Gun Elevation with motors Turret Rotation with motors Road Wheels with Rubber Tires Working STURDY Suspension System Adjustable Idler Wheels Waterproof and maintenance free ball bearings installed Made of Aluminum Copper Brass Rubber for the road wheels All tools and fittings supplied to attach to the tank at no extra cost Pry Bar, Towing Rope, Axe, Spade etc. included Working Head Lights Unpainted

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Hight: 75cm
Length: 211cm
Width: 93cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Length 255cm
Width 88 cm
Height 81 cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Length 255cm
Width 88 cm
Height 81 cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

CLICK HERE for more info

Data Approx.
Weight: about 500KG
Length 255cm
Width 88 cm
Height 81 cm

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

CLICK HERE for more info

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.

Ready to Run:
The most convenient way to get into big scale tanking.
Everything installed, only connect the batteries and you are good to go!

This tank comes according to your specifications with all bells and whistles:

Simulated armor to scale
Heavy duty industry standard hi torque drive motors
Gun Elevation with motors
Turret Rotation with motors
Including Rechargable Hi-Tech Batteries 12V, 24V or 48V
Smoke Generator
Sound Generator
Speakers
Speed Controllers
6 Channel Transmitter
Clean and Professional Electric Layout and Installation
Road Wheels with Rubber Tires
Working STURDY Suspension System
Adjustable Idler Wheels
Waterproof and maintenance free ball bearings installed
Made of Aluminum Copper Brass
Rubber for the road wheels
All tools and fittings supplied to attach to the tank at no extra cost
Pry Bar, Towing Rope, Axe, Spade etc. included
Working Head Lights
Custom Paint and Camouflage to your specifications

Payment Plans Possible

AVAILABLE AGAIN

Our models will be custom made to order only.
NO RUST !
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All ball bearings are maintenance free and waterproof!
All vehicles will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight, we simulate correct armor to scale where visible though !
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard high-torque e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear like the original. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed/bolted
Upper hull: Screwed/bolted
Turret: Screwed/bolted
Headlights: Headlights / rearlights and or Notek lights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Designed with the high end collector or museum in mind these are hand made!
Custom made to order with attention to detail applied throughout the whole process.
Since they are hand made to order there are no two exactly alike. This is a one of a kind item.
Please allow up to 6-12 months for delivery.
A 50% down payment when ordering, 25% due after 3 months and the open balance + shipping at cost due right before delivery.
All tanks will be Made in Germany and shipped right from the factory to you.
Additional shipping charges apply, customs fees or freight forwarders fees, if any, are to be covered by the customer.