Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.

Our models will be custom made on order only.
The materials used are aluminum, copper and brass, rubber where necessary for e.g. the road wheels .
All kits will be researched properly, where possible we use original plans or the real thing in a museum around.
Suspension System: Where it makes sense we copy the original suspension system, torsion bar suspension only on demand
due to its susceptible nature.
Armor: On customers demand only we built your kit with correct to scale armory. We usually pass on this to
reduce weight.
Undercarriage: The ball bearing carriage will be made of sand cast and lathed units. The idler wheel is adjustable.
Road wheels will be fitted with rubber where necessary.
Drive mechanism: industrial standard e-motors move the drive-wheel by drive-chain or belt.
Where necessary we use an additional gear. A strong torque will be generated so your vehicle will make a proper
appearance while driving slow.
Lower hull: Screwed together and pre-assembled where necessary.
Upper hull: Screwed together and pre-assembled where necessary.Wholes for fittings, tools and hatches already done.
Interchangeable upper hulls where possible within a family of vehicles. Use one undercarriage for several versions.
Turret: Screwed together and pre-assembled where necessary. Wholes for fittings, tools and hatches already done.
Mimic for moveable parts already preinstalled with motors.
Headlights: Headlights fully functional.
Tracks: Full metal already drilled and pinned.
Accessories inclusive : All kits come with a collection of spare screws, some oil and grease as well as fitting parts, tools and metal
tow rope.
Static Display Model: Does not include the motors and mechanics for the moveable r/c-components as well as oil and grease, else like the r/c version
Upper Hull only: You get the upper hull alone to be fitted with one of our lower hulls to vary within a family of tanks.
Lower Hull only with motors: Use one lower hull to interchange with various upper hulls within a family of tanks.
Lower Hull only w/o motors: Use one lower hull to interchange with various upper hulls within a family of tanks. No motors included!
Modeling experience necessary.
2 years of guaranty for the motors
10 years guaranty for the vehicle
Designed with the high end collector or museum in mind these are hand made.
Custom made per order with attention to detail applied through the whole process.
Since they are hand made per order there are no two exactly alike. This is a one of a kind item.
Since this item is custom made per order please allow up to 6 months for delivery.
A 50% down payment and 50% upon shipping terms are available if you call in your order.
Due to the size and weight of this item an additional shipping charge will be billed once it is determined.
Please contact us before ordering if you would like to know what this charge will be in advance.